Tub replacement, explained before you call anyone

Replacing a bathtub: materials, types and who handles it in your city

Not every bathroom pro is licensed for the same part of a tub swap. Here is what the materials cost, what the swap involves, and who does that work in your city.

Quick answer

What does bathtub replacement cost?

HomeAdvisor puts a full bathtub replacement at $2,106 to $9,758, averaging $5,931.[1]

A liner runs $2,700 to $10,200 and often needs replacing again in 3 to 5 years. Refinishing averages $484. An acrylic tub runs $1,500 to $10,000. This is a tub-for-tub swap. If supply or drain lines move, ask which license covers the plumbing.[2],[3]

Updated

Browse listings by state

Four materials, four tradeoffs

Acrylic runs 50 to 100 pounds and 1,500 to 10,000 dollars; fiberglass is lighter still, 40 to 80 pounds, and runs 1,500 to 15,000 dollars but fades and chips more easily.[3]

Cast iron is the heavyweight at 200 to 500 pounds, 1,500 to 13,000 dollars, and the most durable of the four. Enameled steel splits the difference: about 150 to 200 pounds, priced close to cast iron, with a thinner enamel coat that scratches more easily.[3],[4]

Refinish, line, or replace

Refinishing a tub averages 484 dollars and can last 10 years or more once fully cured. A liner runs 2,700 to 10,200 dollars and typically needs replacing again in 3 to 5 years. Full replacement runs 2,106 to 9,758 dollars, averaging 5,931, and starts the clock over on all of it.[1],[2]

Two licenses can show up in one swap

A remodeling license and a plumbing license are not the same thing in Washington, California or Florida.[5],[6],[7]

Our guide to what a plumber actually does in a tub swap covers where that line falls in each state.

Browse by state

Questions people ask

Does this site cover switching a tub for a shower?

No. This site is about replacing a tub with a tub, materials, styles, refinishing versus replacement. A tub-to-shower conversion is a different project with its own site.

Do all tub swaps need a permit?

A like-for-like swap in the same spot often does not; moving or adding supply and drain lines usually does.

Sources

  1. How Much Does Bathtub Replacement Cost in 2026?, HomeAdvisor, accessed 2026-11-11
  2. How Much Does Bathtub Refinishing Cost in 2025?, HomeAdvisor, accessed 2026-09-30
  3. Bathtub Materials Comparison: Acrylic, Fiberglass, and Cast Iron, American Bath & Shower, accessed 2026-09-30
  4. Steel vs. Cast Iron Bathtub, Long Home Products, accessed 2026-09-30
  5. RCW 18.106.400: Plumbing contractor license—Application—Requirements—Exemption, Washington State Legislature, accessed 2026-09-30
  6. Description of CSLB License Classifications, Contractors State License Board, accessed 2026-09-30
  7. Florida Statutes 489.105: Definitions, Florida Legislature, accessed 2026-09-30